Shop
Showing 97–144 of 437 results
- Gas Boiler
Central space Heating Gas Boiler 33 Kw for radiators and underfloor heating
Technical Parameters:
- Heat efficiency 103%
- Smoke temperature ≤60℃
- Fuel gas: Nature gas at the bad quality and low pressure 800~1000Pa
- Rated Gas Pressure: Nature gas- 2000Pa
- Exhaust type: Compulsive Balanced Draft System
- Ignition type: Automatic and Flame-out Protection
- Heating system working pressure:05~0.3 Mpa
- DHW water pressure:02~0.6 Mpa
- Highest Temperature: Heating-80℃ / Shower-55℃
Description:
- Mutually independent Heating System & Domestic Hot Water
- Floor heating (55℃) mode / Radiator heating (80℃) mode
- Domestic hot water priority
- Closed water channel for Heating System
- Excellent water circulating pump with auto vent valve
- Two Heat exchanger
- Exhaust by the powerful blower
- 4 Timing function
- Connect with Room Thermostat
- Concentric chimney
Protection Measure:
- Anti-freeze Protection when heating system below 7℃
- Water pump run 1min when standby 24hours
- Flameout automatically when exhaust vent suffer high wind
- 0bar Overpressure Protection
- Fault code display and Alarm
- When Burner flameout, the gas valve automatic shut down at once
- 92℃ Overheat Protection
- Anti-dry burned Protection
SKU: SOL_Q88AND11023 - Chain Block
Chain Block 3000kg 3 Meter
Vital Chain Pulley Block&Chain Block Hoist&Lifting Hoist/hand winch, Lifting Height 3 mtrs, Capacity 2ton
1.Load chain: Black G80 chain, 20CrMn
2.Hook: Deep Forged, High alloy steel
3.Gear: High standard Gear steel
4.Cover: 45# steel
5.Surface treatment: Powder coating
6.Longer life span
SKU: SOL_M8VBK5916475 - Chain Block
Chain Pulley Block 3 Ton Lifting Height 6 Meter
Vital Chain Pulley Block & Chain Block Hoist & Lifting Hoist hand winch Lifting Height 6 meters, Capacity 3ton
1. Load chain: Black G80 chain, 20CrMn, Hook: Deep Forged, High alloy steel, Gear: High standard Gear steel, Cover: 45# steel, Surface treatment: Powder coating, Longer life span
SKU: SOL_X43RPKX29691 - Automotive Tools
Chain Tightener Tool for Motorcycle 25-60mm | Roller Chain Puller SOL-82064A
Heavy-duty motorcycle chain installation tightener tool (25–60 mm) designed for precise alignment and easy chain fitting. Made from durable hardened steel with a smooth screw mechanism for controlled tightening. Ideal for professional mechanics and DIY bike maintenance.
SKU: SOL_Y4D48UM36659 - Automotive Tools
Changeover Type bearing puller 33 pcs (SOL-82037A)
Crafted from high-strength, hardened alloy steel, this puller set offers durability, precision, and flexibility. The modular design with multiple arms, jaws, and accessories ensures compatibility with various sizes and pulling requirements.
SKU: SOL_XF4II2P35426 - Automotive Tools
Changeover type bearing puller Common model (SOL-82039)
Built from high-strength, hardened alloy steel, this puller delivers powerful gripping force and precise operation. The adjustable arms and reversible setup ensure compatibility with a wide range of components and sizes, offering maximum flexibility in workshops and field jobs.
SKU: SOL_IZ6Z43Z35748 - Automotive Tools
Chuck bearing puller 14 pcs (SOL-82035)
Engineered from high-strength, hardened alloy steel, this puller set delivers durability, stability, and reliable performance in demanding automotive and industrial applications. The chuck design expands inside the bearing, providing a secure grip for efficient removal.
SKU: SOL_3AA5K1A35420 - Automotive Tools
Chuck Bearing Puller 17 pcs (SOL-82036)
Manufactured from high-strength hardened alloy steel, this set delivers durability, precision, and reliable performance in demanding automotive and industrial applications. With multiple collets and accessories, it supports a wide range of bearing sizes.
SKU: SOL_PXFM1B435422 - Automotive Tools
Combination 2 Jaws Bearing Puller(SOL-82041)
Built from high-strength forged alloy steel, this puller delivers durability, precision, and reliable performance. The combination design allows flexibility in setup, making it suitable for a wide range of pulling tasks in workshops and maintenance environments.
SKU: SOL_9UYYJ1K35428 - Hdpe Pond Liner Machines
Double Heating Plastic Extruder SOLEX20D
The Solwet SOLEX20D Double Heating Plastic Extruder is designed for thermoplastic welding, plastic fabrication, joining, and repair applications. Its double heating system supports the heating process required for extrusion welding. Suitable for plastic fabrication workshops, industrial maintenance, tank manufacturing, and compatible thermoplastic sheet welding applications.
SKU: SOL_7V64DV238663 - Telescopic Ladder
Double-Sided Household Ladder 3 Steps SOLH503
The SOLWET SOLH503 Double-Side Household Ladder features a 3-step design on each side, allowing access from either side when the ladder is properly opened and secured. It is suitable for household cleaning, reaching storage shelves, office maintenance, and other everyday tasks. Ideal for homes, shops, offices, and suitable work environments. Confirm the material, load capacity, dimensions, and folding mechanism with the supplier before publishing.
SKU: SOL_ZOHUW6R38524 - Gi MS Pipe Threading Machines
Electric 1/2″-2″ Pipe & M8-M20 Bolt (SM-201R) Threading Machine
1. Bolt Thread Size – M8, M10, M12, M14, M16, M18, M20, and MS GI pipe threading size 1/2″, 3/4″, 1-1/4″, 1-1/2″, 2″ Model N0. SM- 201R, Application – Bolt threading and pipe threading, Motor: 1300w induction type, Speed: 30 RPM, Die head for Bolt (1/2″-2″): Quick Open with reverse switch machine can run reverse. complete aluminum allows the body, Sledge guide made of steel bar, Heavy lifting support, constant oil flow. Chuck: Hammer-type with replaceable, rocker-action jaw inserts, Rear centering device: Cam-action, constant oiling system: through the head, with an integral oil reservoir, self-priming, constant-flow, Standard alloy dies, Packing – Wooden Crate Packing dimension: 76*47*55cm, Gross Weight: 81Kg
SKU: SOL_H3X43N91091 - Electrical & Automotive Tools
Electric Diamond Concrete Core Cutter Drill SOLD-130
The SOLWET SOLD-130 Electric Diamond Core Drill Machine is a professional-grade drilling solution designed for accurate and efficient core drilling in reinforced concrete, masonry, and stone. Built for construction professionals, electricians, plumbers, HVAC technicians, and civil contractors, this machine combines powerful performance with portability to meet demanding job-site requirements.
Driven by a 1500W high-efficiency motor, the SOLD-130 provides the power required to drill through hard building materials with ease. Operating at 2000 RPM, it delivers fast cutting speed, cleaner holes, and reduced drilling time while maintaining excellent stability and control.
SKU: SOL_QSJTL5I32530 - Electric Rope Hoist
Electric geared trolley 1Ton
Mini electric hoist electric trolley works by running on the down edge of the H-shaped track, combined with the electric hoist or hand power hoist to be formed into the lane with the bridge, single-rail, or arm-suspended style. They can be widely used in hang-transportation occasions for mounting the machine and equipment in the workshop, mining, dock, warehouse Machine work, injection, compression casting, pressurization, clamping dies, and construction sites.
SKU: SOL_731O3C629339 - Gi MS Pipe Threading Machines
Electric GI MS Pipe Threading Machine 1/2″ to 3″ (SM-301) BSPT & NPT Thread
-13%
Gi MS Pipe Threading MachinesElectric GI MS Pipe Threading Machine 1/2″ to 3″ (SM-301) BSPT & NPT Thread
1. GI MS Electric Pipe Threading Machine Size : 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3″
2. Model No. SM – 301
3. Application – MS & GI Pipe
4. Motor: 750w induction type
5. Speed: 26/11 RPM
6. die head (1/2″-2″): automatic type
7. die head (2 1/2″-3″): automatic type
8. Chuck: Hammer-type with replaceable, rocker-action jaw inserts
9. Rear centering device: Cam-action
10. Oiling system: through the head, with an integral oil reservoir, self-priming, constant-flow
11. 9CrSi is standard
12. Dimension : 94*60*62cm
13. Weight : 121kgs14. Accurate threading of gas, water, oil, stainless pipe
15. Threading completed in one operation.
16. Constant oil flow, through the die head, with an integral oil reservoir.
SKU: SOL_3X5J4AY774 - Gi MS Pipe Threading Machines
Electric GI MS Pipe Threading Machine 2-1/2″-6″ (SM-601)
1. Electric Pipe Threading Machine Size: 2 1/2″-6″
2. Model No. SM – 601
3. Application – MS & GI Pipe
4. Motor: 1100w induction type
5. Speed: 16/6 RPM
6. die head (2 1/2″-4″): automatic type
7. die head (5″-6″): automatic type
8. Chuck: Hammer-type with replaceable, rocker-action jaw inserts
9. Rear centering device: Cam-action
10. Oiling system: through the head, with an integral oil reservoir, self-priming, constant-flow
11. net weight: 195kg
12. 9CrSi is standard
13. Dimension : 104*73*68
14. Weight: 220KgSKU: SOL_Z3SYBFU782 - Motorized Hydraulic Pipe bending Machines
Electric Hydraulic MS GI SS Pipe Benders 1/2 to 2″
The Electric hydraulic pipe benders are designed for precision cold bending of thick-walled pipes (gas, water, steam pipe, unheated black iron pipes, galvanised pipes, schedule 40 & 80) up to 90 deg following GB/T 3091, DIN 2440, EN 10255, BS1387 standards.
Solwet pipe benders are ideal for plumbing, sanitary, and heating installation on construction sites. It is used in making apparatus and boiler making, and for industrial applications.
Characteristic:
- Capable of bending angles from o degrees to 90 degrees on pipes ranging from 1/2″ to 2″.
- Cold bending, no pre-warming of the pipe is required.
- Effective work with an electric pump.
- to carry handle and casters to ensure the quick and easy move from site to site.
- All components are supplied in a wooden case, including the electric pump, the bender, bending shoes, and a service pack.
- Model No. SMPL-EH2
- Electro-Hydraulic Pipe Bender
- Max pressure: 13T
- Max stroke: 250mm
- Bending capacity: 21.3-60mm (1/2″-2″)
- Bending Angle: 90°< a < 180°
- Bending shoes: 1/2″, 3/4″, 1″, 1-1/4″ , 1-1/2″, 2″
- Pipe wall thickness: 2.75-4.5mm
- Packing Size(mm) : 960*350*270
- Gross Weight: 67Kg
Model no. Hydraulic ram output (ton) Ram stroke (mm) Bending range (O.D) mm Bending shoes (inch) G.W. (kg) Packing Size (cm) SMPL-EH2 13 250 ø21.3 – ø60 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″ 67 96X35X28 SKU: SOL_YV64TB71121 - Motorized Hydraulic Pipe bending Machines
Electric Hydraulic Steel MS GI Pipe Bending Machine 1/2″ to 4″
-16%
Motorized Hydraulic Pipe bending MachinesElectric Hydraulic Steel MS GI Pipe Bending Machine 1/2″ to 4″
- Model No. SMPL-EH4
- Electro-Hydraulic Pipe Bender
- Max pressure: 20T
- Max stroke: 370mm
- Bending capacity: Φ21.3-Φ108mm (1/2″-4″)
- Bending Angle: 90°< a < 180°
- Bending shoes: 1/2″ , 3/4″ , 1″ , 1-1/4″ , 1-1/2″ , 2″, 2-1/2″ , 3″ , 4″
- Pipe wall thickness: 2.75-6mm
- Packing Size(mm) : 1180*460*320
- Gross Weight: 163Kg
SKU: SOL_7J1ZL7U1125 - Pipe Grooving Machine
Electric Pipe Grooving Machine 25mm to 200mm (1″ – 8″) for fire fighting pipes
-21%
Pipe Grooving MachineElectric Pipe Grooving Machine 25mm to 200mm (1″ – 8″) for fire fighting pipes
The Model SMPG8 hydraulic roll groover, equipped with an updated hydraulic pump, with a convenient depth adjusting function, powered by an 1100W induction motor is capable of grooving 1”- 12” Sch 40 standard wall pipes. “All-in-one” design for the driveshaft, suitable for heavy-duty jobs. The SMPG12 comes with standard support legs, so the unit can be set up quickly. The induction motor ensures steady and quiet working.
SKU: SOL_O4TW49C34047














































