HDPE electrofusion machine service center
Where is the HDPE electrofusion machine service center?
HDPE Electrofusion service center is located at K-44B, LGF, Kalkaji, New Delhi – 110019
How many days does it take to repair an HDPE electro-fusion machine?
HDPE electrofusion machine takes normally on the day. If the spare parts are unavailable it may take 2-3 days also.
Where do we purchase solwet HDPE electro-fusion machine?
Solwet HDPE electrofusion machine can we purchased
What is the size of the electrofusion machine?
The Solwet Electro fusion welding machines come in two sizes 20 to 315mm and 20 to 630mm. The Amp in the 20 to 315mm is 50amp and 20 to 630mm is 80Amp. The 20 to 613mm machine is 3 phase machine while the 20 to 315mm electro-fusion machine is single phase 220volt.
When do we need to calibrate the electrofusion machine?
The Electrofusion machine needs to be calibrated after one year. Basically, calibration has been to find whether the voltage and current supplied by the machine to output for heating are adequate and fulfill the minimum tolerance +/- voltage and current parameter. The machine’s weakened parts are been replaced during the calibration and also the voltage and current factors are adjusted with the help of the inbuilt software of the machine.
How much memory is stored in the Electrofusion Machine?
The machine has inbuilt memory of 500 fusion stored with all parameters date, time, size, etc. If can be opt-out via printer direct printing and USB text file. The memory overwrites after 500 fusion is completed.
Which type of HDPE electro-fusion machine is best?
HDPE electro-fusion machines with touch screens are very easy to operate and work very fast. The screen shows a graph of the load current and supplied voltage. These machines have memory and USB ports for saved data output and the same port can be used for scanners.
Why do we use a scrapper for electro-fusion?
A scraper is used to scratch the HDPE pipe all around. We sometimes need the upper surface of the pipe to be scratched and for this scrapper is used.
Where we can buy an electrofusion machine old and new?
Below are the pics of some electrofusion machines with a link to the buying site.
Electrofusion machine SE 315 Touch Screen
