Here is a brief guideline to use HDPE pipe welding machine perfectly:
HDPE pipe welding machine is used to weld pipes made from PE, PP, PVDF and cannot be used to weld material without description, otherwise, the machine may be damaged or some accident may be resulted in.
Don’t use the machine in a place with the potential hazard of explosion. The machine is operated by responsible, qualified and train personnel.
The machine operated in a dry area. The machine operated by 220V±10%, 50 Hz. If extended wire should have enough lead section according to its length.
Make sure the hydraulic oil is enough for working; the oil level should be 2/3 of the tank. Replace the iron oil tank cap by the red plastic air bleed cap or the pressure cannot be held.
Clean the surface by using a quick evaporation detergent (alcohol) at regular intervals.
Check the tightening of the screws and the cable and plug condition at regular intervals.
At regular intervals verify its surface temperature by using infrared-ray scanning.
Always keep the blades clean and wash the pulleys by using a detergent. Carry out a complete cleaning operation at regular intervals.